BO SERIES (Brillant)                                                                                                                                           

Collect knobs in Poliamide-6 with glancing fishing. This feature a wide repertory of fitting accessories and sizes
cover practically all needs. Basic colours are black and grey, other colours and special markings could be
made by request.

All metallic parts are in high quality brass. High grip torque, between 8 and 20 kp/cm. For ordering, specify type,
shaft's diameter and colour.




BO SERIES Lined                                                                                                                                                 

Are the same BO series which are printed with a lateral line.
For ordering, identical that BO series but adding "lined"




CAPS                                                                                                                                                                          

They must be always ordered separately from the knob to let personalize every aplication, mentioning type and colour.
Colours: Black, red, yellow, green, blue, grey and ivory.




RING WITH POINTERS                                                                                                                                                              

Used for all our knobs, from 10 to 38mm to identify the knob's position in the panel.
Colours: Black, red, yellow, green, blue and grey.




NUT COVERS                                                                                                                                                          

For smallest knobs of 10 and 15mm, to cover fixing nuts. Available in plain or with engraved line.
Colours: Black and grey. Other colours available for big quantities.




DIALS WITH POINTER                                                                                                                                        

Used for our knobs from 15 to 38mm.
Colours: Black, grey and transparent.




GRADDED DIALS                                                                                                                                                   

Transparente, engraved.
Formats 0/100-270º, 1/10 y 1/12 in 360º




STATORS                                                                                                                                                                 

Used for knobs of 15, 21 and 30mm to improve reading from graded dials.
Colour: Black (with white sector)



BM SERIES (mate)                                                                                                                                                

Manufactured with identical materials than the knobs of BO series, but with matt finishing instead of brilliant.
They feature a higher and more cilindrical profil than BO series, and the lateral groovers are narrower too.
The fitting caps for these knobs are flat instead of convexe, what makes easy any engraving. They allow to use
the wide repertory of fitting accessories of BO series.
Colours: Black and grey.




BM SERIES lined                                                                                                                                                  

Are the same than BM series but with a white line.




MATT CAPS (for BM series)                                                                                                                             

The fitting caps for matt knobs are flat to let an easy engraving. They must be always ordered separately from
the knobs. We can supply plain caps or engraved with pointer.
Colours: Black, red, blue and grey.




"DF" series                                                                                                                                                              

Very solid bakelite knobs for instruments and any industrial aplications. Fixing by strong tempered steel crews.
Colour black and holes of 6mm and 8mm.





GRADED DIALS                                                                                                                                                     

Made from anodized aluminium, for rheostats and variable auto transformers.





METAL BRACKETS FOR 3mm LEDS                                                                                                            

The brackets are comprised of a casing, a nut and a polished brass washer, with different baths being nickel or
chrome-plated or anodised, plus the Polyamide-6 insulation.

Cód PLED03000: 240º external cone (nickel plated)
Cód PLED03001: 240º external cone (chrome plated)
Cód PLED03100: 60º internal cone (nickel plated)
Cód PLED03101: 60º internal cone (chrome plated)
Cód LEDN03000: 240º external cone (black anodised)
Cód LEDN03100: 60º internal cone (black anodised)

Packing: Bags of 100 units.





METAL BRACKETS FOR 5mm LEDS                                                                                                            

The brackets are comprised of a casing, a nut and a polished brass washer, with different baths being nickel or
chrome-plated or anodised, plus the Polyamide-6 insulation.

Cód PLED05000: 240º external cone (nickel plated)
Cód PLED05001: 240º external cone (chrome plated)
Cód PLED05100: 60º internal cone (nickel plated)
Cód PLED05101: 60º internal cone (chrome plated)
Cód LEDN05000: 240º external cone (black anodised)
Cód LEDN05100: 60º internal cone (black anodised)

Packing: Bags of 100 units.





METAL BRACKETS FOR 8mm LEDS                                                                                                            

The brackets are comprised of a casing, a nut and a polished brass washer, with different baths being nickel or
chrome-plated or anodised, plus the Polyamide-6 insulation.

Cód PLED08000: 240º external cone (nickel plated)
Cód PLED08001: 240º external cone (chrome plated)
Cód PLED08100: 60º internal cone (nickel plated)
Cód PLED08101: 60º internal cone (chrome plated)
Cód PLED08200: 90º mixed cone (nickel plated)
Cód PLED08201: 90º mixed cone (chrome plated)
Cód LEDN08000: 240º external cone (black anodised)
Cód LEDN08100: 60º internal cone (black anodised)
Cód LEDN08200: 90º mixed cone (black anodised)

The plastic brackets allow for 1/4W carbon resistors.
Packing: Bags of 100 units.

4mm BINDING POST                                 Model BTH-20A/230V - Five connection paths - Nickel plated pin and nut - Melamine head and body - Colours: Black, red, green, blue - Packing: Bags of 100 pieces - Weight: 6 g/piece

Model BPB-30A/230V - Maximum intensity 30A but very compact - Five connection paths - Nickel plated brass metal - Bakelite head - Colours: Black, red, green, blue - Packing: Bags of 100 pieces - Weight: 9 g/piece

4mm BANANA SOCKETS                         Model HB-4 - Maximum intensity: 10A/230V - Nickel plated brass sleeve and nut - Polyamide 6/6 body, self-extinguishing - Faston 3.9 connection tab or soldered - Colours: Black, red, yellow, green, blue - Packing: Bags of 100 pieces

Model HR-4 - Maximum intensity: 20A/230V - Soldered connection - Exactly the same characteristics as the HB-4, but with   a reinforced sleeve for 20A - Colours: Black, red, yellow, green, blue - Packing: Bags of 100 pieces

4mm SAFETY BANANA SOCKETS    Model HBS-4 - Maximum intensity: 10A/230V - Connection with 3.9 female faston tab or soldered - Polyamide 6/6 body, self-extinguishing - Nickel plated brass sleeve - Colours: Black, red, yellow, green, blue and grey - Packing: Bags of 100 pieces

Model HSR-4 - Maximum intensity: 20A/230V - Soldered connection - Exactly the same characteristics as the HBS-4, but   with a reinforced sleeve for 20A - Colours: Black, red, yellow, green, blue - Packing: Bags of 100 pieces

FUSE HOLDERS FOR THE PANEL      PF-4 - For fuses from 5x20mm up to 15A/250V - Bakelite body and cap with threaded lock - Extremely sturdy nickel plated brass terminals - Fastened to the panel with squared threaded M15 nut - Can be supplied with a retention clamp in the cap   Order key   PF0400100 (normal)   PF0400200 (with retention clamo in the cap)

PF-6 - For fuses from 6.3x32mm up to 15A/250V - Bakelite body and cap with threaded lock - Extremely sturdy nickel plated brass terminals - Fastened to the panel with squared threaded    M15 nut Order key: PF0600100

PF-15 - For fuses from 5x20mm up to 6.3A/250V - Threaded cap with fuse holder - Body, cap and nut of Polyamide-6 with fibre glass,    self-   extinguishing - Nickel plated brass terminals Order key: PF1500100

AERIAL FUSE HOLDER                             PF-8 - Bayonet type lock - Body of bakelite or Polyamide-6 with fibre glass,   self-extinguissing - Tin-plated brass terminals - With cables of 1mm2 x 150mm at the ends - Can also be supplied without cables - Allows for fuses of 5x20 and 6.3x32mm - Maximum intensity: 20A at 230V  Order keys  With cables: PF0800100  Without cables: PF0800000